Altium

Design Rule Verification Report

Date: 2017-06-09
Time: 12:02:28
Elapsed Time: 00:00:02
Filename: F:\Dron2017\Moduł Mały Dron\MMD\MMD.PcbDoc
Warnings: 0
Rule Violations: 36

Summary

Warnings Count
Total 0

Rule Violations Count
Component Clearance Constraint ( Horizontal Gap = 0.254mm, Vertical Gap = 0.254mm ) (All),(All) 0
Power Plane Connect Rule(Direct Connect )(Expansion=0.508mm) (Conductor Width=0.35mm) (Air Gap=0.254mm) (Entries=4) (All) 0
Clearance Constraint (Gap=0.152mm) (All),(All) 0
Un-Routed Net Constraint ( (All) ) 0
Short-Circuit Constraint (Allowed=No) (All),(All) 36
Total 36

Short-Circuit Constraint (Allowed=No) (All),(All)
Short-Circuit Constraint: Between Pad R25-1(56.8mm,71.2mm) on Top Layer And Pad R25-2(55.1mm,71.2mm) on Top Layer Pads have the same JumperID: 1 but different Nets: 3.3V and RESET
Short-Circuit Constraint: Between Pad NTC-1(64.4mm,41.6mm) on Top Layer And Pad NTC-2(64.4mm,39.9mm) on Top Layer Pads have the same JumperID: 1 but different Nets: NetNTC_1 and GND
Short-Circuit Constraint: Between Pad R5-1(61.6mm,39.9mm) on Top Layer And Pad R5-2(61.6mm,41.6mm) on Top Layer Pads have the same JumperID: 1 but different Nets: NetC1_1 and NetNTC_1
Short-Circuit Constraint: Between Pad R6-1(63mm,41.6mm) on Top Layer And Pad R6-2(63mm,39.9mm) on Top Layer Pads have the same JumperID: 1 but different Nets: NetNTC_1 and GND
Short-Circuit Constraint: Between Pad R24-1(66.05mm,45.3mm) on Top Layer And Pad R24-2(67.75mm,45.3mm) on Top Layer Pads have the same JumperID: 1 but different Nets: PWR_KEY and GND
Short-Circuit Constraint: Between Pad R17-1(62.75mm,45.3mm) on Top Layer And Pad R17-2(64.45mm,45.3mm) on Top Layer Pads have the same JumperID: 1 but different Nets: PWR_DWN and GND
Short-Circuit Constraint: Between Pad R27-1(52.7mm,35.5mm) on Top Layer And Pad R27-2(54.4mm,35.5mm) on Top Layer Pads have the same JumperID: 1 but different Nets: NetR27_1 and VBAT
Short-Circuit Constraint: Between Pad R1-1(63.25mm,43.15mm) on Top Layer And Pad R1-2(61.55mm,43.15mm) on Top Layer Pads have the same JumperID: 1 but different Nets: GND and NetR1_2
Short-Circuit Constraint: Between Pad R4-1(65.9mm,41.6mm) on Top Layer And Pad R4-2(65.9mm,39.9mm) on Top Layer Pads have the same JumperID: 1 but different Nets: NetR4_1 and GND
Short-Circuit Constraint: Between Pad R7-1(55.15mm,48.3mm) on Top Layer And Pad R7-2(53.45mm,48.3mm) on Top Layer Pads have the same JumperID: 1 but different Nets: NetR7_1 and NetBAT_1
Short-Circuit Constraint: Between Pad R8-1(56.7mm,50.05mm) on Top Layer And Pad R8-2(56.7mm,48.35mm) on Top Layer Pads have the same JumperID: 1 but different Nets: NetQ5_4 and NetR7_1
Short-Circuit Constraint: Between Pad R9-1(57.55mm,53.5mm) on Top Layer And Pad R9-2(59.25mm,53.5mm) on Top Layer Pads have the same JumperID: 1 but different Nets: VBAT and NetC5_1
Short-Circuit Constraint: Between Pad R10-1(59.25mm,56.4mm) on Top Layer And Pad R10-2(60.95mm,56.4mm) on Top Layer Pads have the same JumperID: 1 but different Nets: NetC5_1 and GND
Short-Circuit Constraint: Between Pad R11-1(52.9mm,39.7mm) on Top Layer And Pad R11-2(52.9mm,38mm) on Top Layer Pads have the same JumperID: 1 but different Nets: NetC6_2 and NetR11_2
Short-Circuit Constraint: Between Pad R35-1(52.2mm,55mm) on Top Layer And Pad R35-2(50.5mm,55mm) on Top Layer Pads have the same JumperID: 1 but different Nets: VBAT and NetR35_2
Short-Circuit Constraint: Between Pad R36-1(50.5mm,56.5mm) on Top Layer And Pad R36-2(52.2mm,56.5mm) on Top Layer Pads have the same JumperID: 1 but different Nets: NetR35_2 and GND
Short-Circuit Constraint: Between Pad R19-1(95.7mm,37.6mm) on Bottom Layer And Pad R19-2(94mm,37.6mm) on Bottom Layer Pads have the same JumperID: 1 but different Nets: SIM_DATA and SIM_VDD
Short-Circuit Constraint: Between Pad R20-1(83.9mm,39.3mm) on Bottom Layer And Pad R20-2(82.2mm,39.3mm) on Bottom Layer Pads have the same JumperID: 1 but different Nets: NETLIGHT and GND
Short-Circuit Constraint: Between Pad R21-1(79.7mm,38.85mm) on Bottom Layer And Pad R21-2(79.7mm,37.15mm) on Bottom Layer Pads have the same JumperID: 1 but different Nets: STATUS and GND
Short-Circuit Constraint: Between Pad D2-2(87.675mm,37.5mm) on Bottom Layer And Pad D2-5(89.625mm,37.5mm) on Bottom Layer Pads have the same JumperID: 1 but different Nets: GND and SIM_DATA
Short-Circuit Constraint: Between Pad D2-6(89.625mm,36.85mm) on Bottom Layer And Pad D2-5(89.625mm,37.5mm) on Bottom Layer Pads have the same JumperID: 1 but different Nets: SIM_CLK and SIM_DATA
Short-Circuit Constraint: Between Pad D2-1(87.675mm,36.85mm) on Bottom Layer And Pad D2-5(89.625mm,37.5mm) on Bottom Layer Pads have the same JumperID: 1 but different Nets: SIM_VDD and SIM_DATA
Short-Circuit Constraint: Between Pad D2-6(89.625mm,36.85mm) on Bottom Layer And Pad D2-2(87.675mm,37.5mm) on Bottom Layer Pads have the same JumperID: 1 but different Nets: SIM_CLK and GND
Short-Circuit Constraint: Between Pad D2-1(87.675mm,36.85mm) on Bottom Layer And Pad D2-2(87.675mm,37.5mm) on Bottom Layer Pads have the same JumperID: 1 but different Nets: SIM_VDD and GND
Short-Circuit Constraint: Between Pad D2-6(89.625mm,36.85mm) on Bottom Layer And Pad D2-1(87.675mm,36.85mm) on Bottom Layer Pads have the same JumperID: 1 but different Nets: SIM_CLK and SIM_VDD
Short-Circuit Constraint: Between Pad R16-1(85.75mm,53.9mm) on Bottom Layer And Pad R16-2(87.45mm,53.9mm) on Bottom Layer Pads have the same JumperID: 1 but different Nets: 5V and NetC11_2
Short-Circuit Constraint: Between Pad R15-1(85.3mm,57.95mm) on Bottom Layer And Pad R15-2(85.3mm,59.65mm) on Bottom Layer Pads have the same JumperID: 1 but different Nets: NetC9_2 and GND
Short-Circuit Constraint: Between Pad R14-1(85.3mm,55.15mm) on Bottom Layer And Pad R14-2(85.3mm,56.85mm) on Bottom Layer Pads have the same JumperID: 1 but different Nets: 5V and NetC9_2
Short-Circuit Constraint: Between Pad R13-1(87.9mm,56.85mm) on Bottom Layer And Pad R13-2(87.9mm,55.15mm) on Bottom Layer Pads have the same JumperID: 1 but different Nets: NetC10_1 and NetC9_1
Short-Circuit Constraint: Between Pad R2-1(74.8mm,33.85mm) on Bottom Layer And Pad R2-2(74.8mm,32.15mm) on Bottom Layer Pads have the same JumperID: 1 but different Nets: NetLED1_K and NetR2_2
Short-Circuit Constraint: Between Pad R3-1(76.9mm,32.15mm) on Bottom Layer And Pad R3-2(76.9mm,33.85mm) on Bottom Layer Pads have the same JumperID: 1 but different Nets: NetR3_1 and NetLED2_K
Short-Circuit Constraint: Between Pad R29-1(79mm,33.85mm) on Bottom Layer And Pad R29-2(79mm,32.15mm) on Bottom Layer Pads have the same JumperID: 1 but different Nets: NetR29_1 and NetBAT_L_A
Short-Circuit Constraint: Between Pad R28-1(81.1mm,33.85mm) on Bottom Layer And Pad R28-2(81.1mm,32.15mm) on Bottom Layer Pads have the same JumperID: 1 but different Nets: NetR28_1 and NetLoRa_L_A
Short-Circuit Constraint: Between Pad R22-1(85.3mm,33.85mm) on Bottom Layer And Pad R22-2(85.3mm,32.15mm) on Bottom Layer Pads have the same JumperID: 1 but different Nets: VBAT and NetNET_A
Short-Circuit Constraint: Between Pad R23-1(83.2mm,33.85mm) on Bottom Layer And Pad R23-2(83.2mm,32.15mm) on Bottom Layer Pads have the same JumperID: 1 but different Nets: VBAT and NetR23_2
Short-Circuit Constraint: Between Pad R12-1(93.65mm,57.5mm) on Bottom Layer And Pad R12-2(91.95mm,57.5mm) on Bottom Layer Pads have the same JumperID: 1 but different Nets: NetR12_1 and GND

Back to top