Altium

Design Rule Verification Report

Date:		2017-09-21
Time:		15:31:15
Elapsed Time:		00:00:01
Filename:		M:\Pylomierz_reczny\Pylomierz_reczny.PcbDoc

Warnings:		0
Rule Violations:		10

Summary

Warnings	Count
Total	0

Rule Violations	Count
Clearance Constraint (Gap=0.2mm) (All),(All)	0
Short-Circuit Constraint (Allowed=No) (All),(All)	10
Un-Routed Net Constraint ( (All) )	0
Power Plane Connect Rule(Direct Connect )(Expansion=0.508mm) (Conductor Width=0.254mm) (Air Gap=0.254mm) (Entries=4) (All)	0
Total	10

Short-Circuit Constraint (Allowed=No) (All),(All)
Short-Circuit Constraint: Between Pad SW-(38.8mm,32.475mm) on Top Layer And Pad SW-(38.7mm,32.975mm) on Multi-Layer Location : [X = 38.7mm][Y = 32.725mm]
Short-Circuit Constraint: Between Area Fill (38.2mm,32.3mm) (42.9mm,33.475mm) on Top Layer And Pad SW-(38.7mm,32.975mm) on Multi-Layer Location : [X = 38.7mm][Y = 32.975mm]
Short-Circuit Constraint: Between Pad SW-(42.3mm,32.475mm) on Top Layer And Pad SW-(42.4mm,32.975mm) on Multi-Layer Location : [X = 42.4mm][Y = 32.725mm]
Short-Circuit Constraint: Between Area Fill (38.2mm,32.3mm) (42.9mm,33.475mm) on Top Layer And Pad SW-(42.4mm,32.975mm) on Multi-Layer Location : [X = 42.4mm][Y = 32.975mm]
Short-Circuit Constraint: Between Area Fill (39.85mm,32.875mm) (41.25mm,34.225mm) on Top Layer And Pad SW-(40.55mm,34.575mm) on Top Layer Location : [X = 40.55mm][Y = 34.125mm]
Short-Circuit Constraint: Between Area Fill (38.2mm,32.3mm) (42.9mm,33.475mm) on Top Layer And Pad SW-(42.3mm,32.475mm) on Top Layer Location : [X = 42.3mm][Y = 32.637mm]
Short-Circuit Constraint: Between Area Fill (38.2mm,32.3mm) (42.9mm,33.475mm) on Top Layer And Pad SW-(38.8mm,32.475mm) on Top Layer Location : [X = 38.8mm][Y = 32.637mm]
Short-Circuit Constraint: Between Pad LED2-1(36.115mm,60.115mm) on Bottom Layer And Pad LED2-1(35.65mm,59.89mm) on Bottom Layer Location : [X = 35.982mm][Y = 59.89mm]
Short-Circuit Constraint: Between Pad R37-2(57.9mm,59.825mm) on Bottom Layer And Pad R37-1(57.9mm,58.125mm) on Bottom Layer Pads have the same JumperID: 1 but different Nets: SET and 3.3V
Short-Circuit Constraint: Between Pad R36-2(56.051mm,60.101mm) on Bottom Layer And Pad R36-1(54.849mm,58.899mm) on Bottom Layer Pads have the same JumperID: 1 but different Nets: RESET_PMS and 3.3V